• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Bimini pin release replacement

haolegirl70

Jet Boat Addict
Messages
116
Reaction score
88
Points
87
Boat Make
Yamaha
Year
NA
Boat Model
AR
Boat Length
25
One of the pins that locks the Bimini bar in place has been lost. Yamaha wants to order a whole new assembly which will take forever and we are looking to sell it so any suggestions on how to replace just that pin?
 
Bottom of the lake right by the left hand courtesy dock at Abiquiu Lake in New Mexico. Just put it there myself this afternoon.

One of the pins that locks the Bimini bar in place has been lost. Yamaha wants to order a whole new assembly which will take forever and we are looking to sell it so any suggestions on how to replace just that pin?
 
I just ordered 4 on Amazon for about $12. Fit great and have the teathers attached with a split ring included.
 
I just ordered 4 on Amazon for about $12. Fit great and have the teathers attached with a split ring included.
Got a link to what you bought? Photo of it in place once it arrived?
 
One of the pins that locks the Bimini bar in place has been lost. Yamaha wants to order a whole new assembly which will take forever and we are looking to sell it so any suggestions on how to replace just that pin?
Are you talking about this type of spring pin? I had one of these on my bimini pole break and replaced it with this.

 
Last edited:
The pictures they put on Amazon are kinda weird. I don't know why they show the one with the cleat. Here is one with a quarter shown. I can measure it if you need.16921426709488038044654187250373.jpg
 
The pictures they put on Amazon are kinda weird. I don't know why they show the one with the cleat. Here is one with a quarter shown. I can measure it if you need.View attachment 206540
I have to measure the diameter of the posts themselves to see but it looks like they'd work
 
Back
Top