• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

'15+ 240/242 tongue weight

Rodney Findley

Jet Boat Addict
Messages
98
Reaction score
28
Points
102
Location
Cumming, GA
Boat Make
Yamaha
Year
2015
Boat Model
SX
Boat Length
24
Is it me or do these boats fill heavy on the tongue? When I pull, it feels real "spongy" and gives the sensation of being overweight but that is not the case. I have pulled trailers for years but this boat fells a little different?
 

Julian

Jetboaters Fleet Admiral 2*
Staff member
Administrator
Messages
18,359
Reaction score
20,439
Points
1,082
Location
Raleigh, NC 27614
Boat Make
Yamaha
Year
2016
Boat Model
242X E-Series
Boat Length
24

McMark

Jetboaters Captain
Messages
1,280
Reaction score
1,316
Points
217
Location
Monongahela, PA
Boat Make
Yamaha
Year
2015
Boat Model
AR
Boat Length
24
Use 2 scales with a board across. Add the weights together.
 

Hana

Jet Boat Addict
Messages
93
Reaction score
106
Points
117
Location
Alpharetta, GA
Boat Make
Yamaha
Year
2016
Boat Model
242X E-Series
Boat Length
24
Curious myself, I'm towing a 2016 242x with a 2005 Expedition. It seems pretty heavy on the tongue. Also wondering how you guys leveled your trailer for the hitch height. I see that when I place a level at the front of the trailer it gives a different reading than if I put it between the axles or behind the axles.
 

Zeus2013

Jetboaters Commander
Messages
617
Reaction score
328
Points
197
Location
Farmingdale, NY
Boat Make
Yamaha
Year
2015
Boat Model
SX
Boat Length
24
I have do not have a drop in my hitch and it is fine. I had a 3" drop and it was low. Tongue weight appears fine.
 

rsg1963

Jetboaters Lieutenant
Messages
333
Reaction score
221
Points
167
Location
Dublin, Ca.
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
Have not noticed anything excessive here. Should be about 10-15% of the total weight on the hitch ball (about 500 give or take for my setup) and that seems inline with what mine is. I tow with two different vehicles and they both feel fine with it. I'm wondering if your tires are inflated to max, tires are spec'd for the weight, or perhaps the rear shocks are ready for retirement? Scale idea is a good one. Using a 4x4 across two bathroom scales should do it. I might just try that myself, just so I know.
 

Rodney Findley

Jet Boat Addict
Messages
98
Reaction score
28
Points
102
Location
Cumming, GA
Boat Make
Yamaha
Year
2015
Boat Model
SX
Boat Length
24
I am pulling a 2015 Sx240 with a 2013 Expedition EL. What do you mean by "spongy"?
On bumps and road transitions, it seams to bounce a lot at the tongue. I might try and adjust the ball height, I currenly have a 2" drop hitch on the Expedition.... If I leveled it out it might work better.
I shoud have thought of that first? I think the ideal hich height is around 26-27" correct?
 

Julian

Jetboaters Fleet Admiral 2*
Staff member
Administrator
Messages
18,359
Reaction score
20,439
Points
1,082
Location
Raleigh, NC 27614
Boat Make
Yamaha
Year
2016
Boat Model
242X E-Series
Boat Length
24
My understanding is that the maximum tongue weight on a Class III hitch (ball) is limited to 500 lbs. So they'd better not have put 15% of the trailers weight on the tongue! In my case that would be 5382 pounds (dry) *.15 = 807 pounds! Even at 10% it would be to high for the hitch. Hopefully they've balanced these trailers to ensure that with gas and gear they aren't going over the 500lbs....
 

Zeus2013

Jetboaters Commander
Messages
617
Reaction score
328
Points
197
Location
Farmingdale, NY
Boat Make
Yamaha
Year
2015
Boat Model
SX
Boat Length
24
On bumps and road transitions, it seams to bounce a lot at the tongue. I might try and adjust the ball height, I currenly have a 2" drop hitch on the Expedition.... If I leveled it out it might work better.
I shoud have thought of that first? I think the ideal hich height is around 26-27" correct?
I never checked the height. However, on bumps, you are going notice some bounce depending on the amount of transition in the road.
 

Bennie

Jetboaters Captain
Messages
1,550
Reaction score
1,468
Points
222
Location
Loxley, AL
Boat Make
Yamaha
Year
2015
Boat Model
Limited S
Boat Length
24
@Rodney Findley - What kind of tires are on your Expedition? My wife has a Yukon and we have the same problem with get vehicle. Though no problem with my F150....which has LT tires, "E" class. Here's are passenger rated.

Let me know what your tires say or just take a pic. We're happy to help
 

Bennie

Jetboaters Captain
Messages
1,550
Reaction score
1,468
Points
222
Location
Loxley, AL
Boat Make
Yamaha
Year
2015
Boat Model
Limited S
Boat Length
24
@Fozzy - That thing is friggin SWEET!!
 

subysti

Jetboaters Captain
Messages
1,087
Reaction score
829
Points
237
Location
east Longmeadow Mass
Boat Make
Yamaha
Year
2015
Boat Model
AR
Boat Length
24
Like that hitch. Where did you find that??
 

Fozzy

Jet Boat Addict
Messages
43
Reaction score
38
Points
97
Location
Salt Lake City
Boat Make
Yamaha
Year
2016
Boat Model
242 Limited S E-Series
Boat Length
24
I live in Utah and they are a local company. Very nice hitch but they are expensive. Consider the price of your tow vehicle and the toys you tow, it's worth it.
https://www.weigh-safe.com
 

rsg1963

Jetboaters Lieutenant
Messages
333
Reaction score
221
Points
167
Location
Dublin, Ca.
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
Sounds about right at roughly 10-11%?
 

Mainah

Jetboaters Admiral
Messages
3,016
Reaction score
4,049
Points
362
Location
Chapin, SC
Boat Make
Yamaha
Year
2016
Boat Model
Limited S
Boat Length
24
My Shoreland'r manual says it should be 5% to 7%.
I did some research on this. The 10-15% rule of thumb is based on most other trailer types out there. The pivot point on most boat trailers is further back as a percentage of total length of the trailer/load which means less tounge weight is needed. At least that is what I read amd how I understand it. Makes semse based on the physics of leverage. That said I still like the 10% rule of thumb.
 
Top