• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

fault codes

Grumpy

Active Member
Messages
2
Reaction score
0
Points
40
Boat Make
Yamaha
Year
2018
Boat Model
FSH Sport
Boat Length
19
the last 2 times I have started my fsh190 the alarm sounds and gives me YDIS code: 1 and DBDS code: SPN 0 .. I drive it for about 5 minutes then shut it off and turn it back on and alarms stops and no codes.. has anybody else had this problem or know what the issue is


thanks
 
For my boat, a Diagnostic code of 0 = normal. There is no SPN 0 code, the lowest # it goes to on SPN is 105 (Intake Air Temp Sensor)
 
the last 2 times I have started my fsh190 the alarm sounds and gives me YDIS code: 1 and DBDS code: SPN 0 .. I drive it for about 5 minutes then shut it off and turn it back on and alarms stops and no codes.. has anybody else had this problem or know what the issue is


thanks
You ever figure this out? I’m having the same issue
 
the last 2 times I have started my fsh190 the alarm sounds and gives me YDIS code: 1 and DBDS code: SPN 0 .. I drive it for about 5 minutes then shut it off and turn it back on and alarms stops and no codes.. has anybody else had this problem or know what the issue is


thanks
Did this stop and clear on it's own eventually? My 190 is doing the same
 
Anyone figure this out? I have the same thing going on with my AR190
 
Back
Top