• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

Show us what you see!!!

Best part of fall boating empty lake and empty ramps...Keuka State Park

B05B2950-9542-4BDA-B54F-5FC9806C8071.jpeg1EBD4E48-6FCA-4E71-9ED1-04F507DC1DEE.jpeg
 
Out on the Lake today.

 
@Lurch,

What's the story with the last photo, with the disconnected hose and the shredded oil filter? :confused:

Jim
 
@Lurch,

What's the story with the last photo, with the disconnected hose and the shredded oil filter? :confused:

Jim
Lol, my filter wrench and channel locks were no match for the gorilla at Yamaha who installed the filter. I pulled the hose for access. Now I’m drinking beer and giving it the stink eye while the penetrating oil takes a turn
 
I’ve seen guys drive a long screw driver or rat tail file through them then twist them off.
That might be coming up, BigN8. Judging by the cheap wall of this filter, I’ll likely rip it in half before it breaks free. I’m trying the paracord trick next
 
After destroying a filter with wrench, pliers and a screwdriver I’ve had to take a hammer & chisel to the base of the filter head before to break it free. Just be sure not to hit the block if you do this
 
I’ve seen guys drive a long screw driver or rat tail file through them then twist them off.

Done this. Used a big long phillips head.
 
Finally got to see a peach blossom freshwater jellyfish today! I had just anchored in a sweet cove I found and relaxing on the swim deck when I spotted a few flow past me. Grabbed the GoPro and tried to capture these little guys. Pretty cool!

 
Finally got to see a peach blossom freshwater jellyfish today! I had just anchored in a sweet cove I found and relaxing on the swim deck when I spotted a few flow past me. Grabbed the GoPro and tried to capture these little guys. Pretty cool!

That’s amazing! Great job capturing video of them. I’ve never heard of a fresh water jellyfish.
 
That yammie hump tho

5D782AA1-A5F4-41C7-8664-10327F4C2D2E.jpeg
 
Great sailing conditions yesterday, winds 10-12 with gusts to 15kts from the South. We went over to New York again to the mouth of Willsboro Bay, aka Indian Bay on a three hour tour.

20210912_130340.jpg

The mouth of Indian Bay

20210911_132110.jpg

It was fun for both of us as I played with the sail set to keep our heel below 10°. We sailed alot of the time with just the mainsail. The Rail meat, aka wife, approved as she could dip her toes over the side into the spray.
Yes, rail meat is a sailing term...
20210912_072307.jpg

20210911_135609.jpg

20210911_135605.jpg

20210911_132958.jpg

We made pretty good time when we unfurled the genoa with 2 reefs in it. Just under 7kts. Which is pretty good since the main was not trimmed for speed but trimmed to sail flatter. Seen in the video below.

20210911_125145.jpg


A great day on the boat!

20210911_140014.jpg
 
Last edited:
Trying something different for hanging fenders. Nylon strapping with plastic quick clips. Easy to hang, adjust to different situations and remove. So far so good with launching today. We’ll see how they work the rest of the season.
3738D428-3138-4EDD-B70F-22C8100FFCC2.jpegE82ED96A-1D05-42F1-8CB0-03D9FF5C0AC3.jpeg
 
Back
Top