REM835
Jet Boat Junkie
- Messages
- 104
- Reaction score
- 108
- Points
- 142
- Location
- Lebanon, OH
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- SX192
- Boat Length
- 19
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
You may have to remove the fin to remove the steering cable bolt. I have that bolt installed upside down to avoid that problem and carry a spare in the boat.Also am I going to have any surprises with the jet boat pilot fins. I cobras on mine.
Maybe he’ll be able to grab it from below once it’s out of the water. I’ve gotten a badly wedged stick out with pliers and patience but it would never work trying under water.We tried all we could for the night. He even dove underneath. Feels to be about 3in long and 1 inch wide. Jammed on the very top between the blades and can’t get a grip on it with anything. He is going to have it on the trailer first thing in the morning for us to pull it. Videos look pretty straight forward. Anyone know the torque spec for the four pump bolts. Also am I going to have any surprises with the jet boat pilot fins. I cobras on mine.
Check this one out. https://jetboaters.net/threads/what-tool-kit-do-you-keep-onboard.1779/Is there a recommended tool bag list on here?