• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Reminder of the Thrust Vector and Lateral Thruster group buy through JetBoatPilot.....you only have Until AUGUST 31st. to get in on this group buy.
    With a Maximum discount of 35% this is the highest discount you can get on these, so don't miss out!
    So if you are looking to improve your steering-either forwards or in reverse.....this sale may be for you!  

    Thank you Will @jetboatpilot for offering this exclusively to JETBOATERS.net members!

    (You can click the X to the right to dismiss this notice)

What are you using to hold up your flags?

LindaDLS

Well-Known Member
Messages
26
Reaction score
7
Points
62
Location
San Antonio Texas
Boat Make
Yamaha
Year
NA
Boat Model
212SE
Boat Length
21
We just bought our first boat 2020 AR210, and want some ideas/advice on what y’all used to mount a flag/pole? And where you set it up please.
 
You can see from this photo where I mounted my flag poles. Flag poles are #21 in my mods list (also in my signature under the 242X Link)

1662129447004.jpeg
 
You really added a lot of nice modifications!! Thanks for the ideas ?
 
2.5" worked on my tower, should work on yours. Of course if there is an issue you can return and get the other one.
 
The table leg mount and a PVC pipe.
 
I had @HailMary Make me mounts for my umbrella with a pin and flag with pin so I could use them in my rear table leg holder. What is nice Is I can then also use the table leg for the table at the same time in the cockpit. Haven't used the flag one yet, since I got the BigAir for the tower.

Yamaha – JewlsCustoms
 
Back
Top