• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Wiring in fish finder 2022 FSH 210 Sport

tradenpaint

Jet Boat Lover
Messages
55
Reaction score
9
Points
77
Boat Make
Yamaha
Year
2021
Boat Model
FSH Sport
Boat Length
21
Hey folks,

I'm not an electrician so I'm needing to know what the best way to cut in my negative & positive wires from my Garmin to the back of the toggle switch (pictured). I would rather not splice. Any feedback out there? TIA
 

Attachments

  • toggle 2.jpg
    toggle 2.jpg
    843 KB · Views: 15
  • toggle.jpg
    toggle.jpg
    1 MB · Views: 12
The Red arrow points to the switched terminal. Attach the hot or positive feed for your Garmin here.

211999E1-B3C1-4B63-AE54-B0A085E48C30.jpeg

The blue arrow is pointing to the negative terminal where you install the splitter or stacking connector. This ground is also the ground for the light inside the switch that illuminates when you turn the switch on. Attach the ground or negative for your Garmin here.

F23D8E0C-E143-4D6B-A851-44D24717DB28.jpeg
 
+1 for Blade Terminal Splitter. I probably use way to many of these ?
 
Back
Top