- Messages
- 7,067
- Reaction score
- 6,004
- Points
- 527
- Location
- Naples Florida
- Boat Make
- Yamaha
- Year
- 2005
- Boat Model
- SX
- Boat Length
- 23
Looking good! I see Julian's Canvas Shop in your future. Glad it worked out for you.
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
20 was perfect. I'd use it on any project like this - not so thin that it rips, and no so thick that it weighs too much for the snaps.@Julian Great project! I have a camper with the cold out tent ends. Most of the tome I enjoy the views of the places we go to so I’ll unzip the tent end, problem is then keep the heat or the AC in. I wanted to put a clear plastic window like you did but haven’t gotten around to it. My question is... the gauge that you used. If you could go back would you go thicker or was 20 perfect? And if you have input on my project, what gauge would you suggest?