upperdeck
Jetboaters Commander
- Messages
- 563
- Reaction score
- 639
- Points
- 197
- Location
- menomonee falls, WI
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- X
- Boat Length
- 21
I couldn't dig up my photos, and my boat is in storage. But here's what I did.
I used this antenna.
http://www.amazon.com/Shakespeare-5242-A-Profile-End-Fed-Antenna/dp/B00JDI0M44/ref=sr_1_3?ie=UTF8&qid=1397868111&sr=8-3&keywords=Shakespeare 5242

You can see it comes with a 90° bracket. I mounted the vertical part of the bracket on the vertical part of the tower where the support attaches. See arrow below. I attached it by drilling and tapping this block of aluminum.

I then ran the antenna up the tower and made the connections. Pretty simple install.
If you really need the range, go with an 8' fiberglass version. I chose this compromise because the whip is easily removed for storage. The cannister on the bottom and the wiring remains installed.
I used this antenna.
http://www.amazon.com/Shakespeare-5242-A-Profile-End-Fed-Antenna/dp/B00JDI0M44/ref=sr_1_3?ie=UTF8&qid=1397868111&sr=8-3&keywords=Shakespeare 5242

You can see it comes with a 90° bracket. I mounted the vertical part of the bracket on the vertical part of the tower where the support attaches. See arrow below. I attached it by drilling and tapping this block of aluminum.

I then ran the antenna up the tower and made the connections. Pretty simple install.
If you really need the range, go with an 8' fiberglass version. I chose this compromise because the whip is easily removed for storage. The cannister on the bottom and the wiring remains installed.