Replaced my anchor locker drain fitting due to leaks

[jcb1977]

I'm also thinking about finding some sort of self-filling product to fill the bottom of the anchor locker up to the drain elevation. it's not much maybe an 1" or 2". thinking about flex seal paste or flex seal liquid to just pour down there and let it cure to fill that gap so water doesn't' collect

 

[FSH 210 Sport]

I'm also thinking about finding some sort of self-filling product to fill the bottom of the anchor locker up to the drain elevation. it's not much maybe an 1" or 2". thinking about flex seal paste or flex seal liquid to just pour down there and let it cure to fill that gap so water doesn't' collect

Good idea! If you are a bit creative you could make the bottom slightly higher than the drain with a bit of a depression leading to the drain to promote even better draining… but just making it level with the drain would go a long ways to keeping that locker dryer.

 

[jcb1977]

Good idea! If you are a bit creative you could make the bottom slightly higher than the drain with a bit of a depression leading to the drain to promote even better draining… but just making it level with the drain would go a long ways to keeping that locker dryer.

I poured some flex seal liquid in the bottom of the locker as a filler so there's no room for water to remain. I think it's going to work out pretty well.

 

[Kaffi311]

Wow- newbie here w a 2023 FSH 222 Sport E. Just read this 8 page thread - and checked out our anchor locker. Our drain hole doesn't look as bad as some here- but drain still needs to be replaced as it does not reach all the way into the anchor locker. Our boat also has the clamshell cover on the outside. What is the current product link to get to complete this job? I am of course going to remove the drain and measure before ordering- but want to make sure I am getting the correct materials to accommodate this clamshell cover. Thanks !!!! Love (and already addicted to) this forum

 

[anmut]

I chased this for years, then just decided to silicon the hole completely shut. No more water issues.