- Messages
- 8,178
- Reaction score
- 22,455
- Points
- 862
- Location
- Northern Vermont Lake Champlain
- Boat Make
- Boston Whaler
- Year
- 1995
- Boat Model
- Other
- Boat Length
- 18
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
I intended to do the same, but it was 31* when I got up. ?
After 24 years of playing golf, got my first Ace this morning. [HASH=5828]#8,[/HASH] 136 yds, 50 degree wedge. Right at it, 2 hops and rolled in.
View attachment 211767View attachment 211768
Opened up a bar tab for the bar area. I think I closed it at around $400, but honestly.....this morning I can't quite remember.Congrats, now what happens at the 19th hole?
Congrats! I am trying for #2 but those odds are pretty slim.After 24 years of playing golf, got my first Ace this morning. [HASH=5828]#8,[/HASH] 136 yds, 50 degree wedge. Right at it, 2 hops and rolled in.
View attachment 211767View attachment 211768
Impact graphics came in. I think they did an amazing job. My wife isn't a fan and thinks they're too showy, but I don't think they're any worse than the factory ones. I love em!We had a pretty early cold snap for NC, and then a really nice warm/hot snap. So, I grabbed the boat really quick on the last "warm" day of the snap to do a test fit for the impact graphics and to ship those back to jetboatpilot. My boat is beyond taken care of and the graphics are peeling up in several places on a lot of the graphics. I figured I can still get the OEM graphics, but they obviously suck and I'm what you'd call just an ok vinyl installer. And by OK I've done it a handful of times for jetskis and such. Didn't really wanna futz with 6'+ long graphics and them likely to peel up in a few years anyways....at best. Not to mention the cost differential between the impact graphics and these were neglible with an easier install.
This is why they do the test fits cause I have ballast overflow vents on both sides which were not accounted for in their original template it seems. So I taped over that with painters tape and traced it with a sharpie.
View attachment 211567
View attachment 211568
View attachment 211569
Headed back to storage. The temps dropped by nearly 10* from when I started just a few hours before.
View attachment 211570
Jeannine already using her new baking kitchen and has already 24 orders of cookies to do.
View attachment 211963View attachment 211964